• Heavy duty compartment chassis mounted service module c/w rear tray with steel checker plate floor, heavy duty steel guards over bogie wheels and ground level entry steps.
• AES Service Modules come with independent ROPS & FOPS system designed and fabricated to ISO 3471 / 3449 standards to suit a range of cab over and bonneted vehicle chassis.
• Fully sealed dust resistant pump and reel cabinet fitted with horizontally hinged compartment door for ground level access on the right-hand side.
• PDS 80 Air Compressor located, rear (right-hand side) with own isolation system.
• Module paint spec finished in a 2pac white
• Reversing camera, audible and features a colour monitor for increased safety.

PUMPS

• 1x Graco 50:1 high pressure grease pump
• 1x Graco 10:1 bulk grease pump
• 4x Graco double diaphragm pumps for diesel 2″, waste 1″, water ¾”, and coolant ¾”
• 1x Graco 5-1 high volume oil pumps for gear oil
• 3x Graco 3-1 high volume oil pumps for hydraulic and engine oils

HOSES, REELS & NOZZELS

• Banlaw fast fill diesel fuel system
• Graco 1½” hose reels for diesel
• Graco ¾” hose reels for oil delivery and EVAC suction
• EVAC system fitted with a four-way valve to allow suction and delivery
• Graco ½” hose reels for coolant, air and water
• Graco easy grip hand piece with non drip nozzles for oil dispensing reel
• All reels are calibrated digitally, easy to read dispensing metres for oil
• All hose reels and tanks are hard labelled for easy identificationair

AIR COMPRESSOR & RETICULATION

• Airman PDS80 Air Compressor
• Independent electric system with lockable isolator
• All pumps are pneumatic system, controlled by air regulator for proper set-up
• Compressor stop start accessible from ground level

OPTIONS

• Hydraulic retarders are available for most makes and models
• Rear and front towing hitch
• Graco ¾” hose reels for oil delivery and EVAC suction
• EVAC system fitted with a four-way valve to allow suction and delivery
• Graco ½” hose reels for coolant, air and water
• Graco easy grip hand piece with non drip nozzles for oil dispensing reel
• All hose reels and tanks are hard labelled for easy identification air

MOUNTING

• All mounting points fitted with spring retained bolts
• Full length chassis nylon fitted between the module and chassis

TRUCK CABIN / CHASSIS

• 6×4 or 8×4 automatic transmission long chassis
• Electrical hour metre
• Independent electrical system with lockable isolator

SIGN WRITING

• All hose, reels and fill points labelled
• Safety signage, compartments product labels, flammable liquids to meet Australian standards and mine site requirements.

COMMISSIONING

• Pre-delivery operational checks
• Meter calibration and flow rate testing
• Parts book and service manual

FIRE SUPPRESSION

• 2x fire extinguishers: 9kg – ground level, 1x at rear of module, 1x at front of module

RAILS, GUARDS & STEPS

• All rails, guards, and steps manufactured to AS 1657- 1992

ELECTRICAL

• 2x amber flashing lights and 4 LED service lights
• 2x compartment work lights
• 2x reversing lights at rear with dual stop/tail indicator clearance lights
• Jump start receptacle
• Reverse alarm
• Starter isolator
• 2 x emergency stops 1 x module mounted, 1 x cab / dash mounted
• ROPS
• Reversing camera
• Compressor park brake shut-off