Skip to content

AES 14000 Water Tank

AES 14000 Water Tank

AES Site Images 1500 Water Truck

All AES Water Truck Modules come with fully integrated ROPS and/or FOPS systems designed and fabricated to AS2294-1997 to suit a range of cab-over and bonneted vehicle chassis.

FAN SPRAYS

  • Three magnum air operated spray heads
  • One left, one right and one central
  • All individually controlled from cabin

DRIBBLE BAR

  • 125mm full width type with air operated butterfly valve controlled from cabin.

CANNON

  • Designed and built by AES Equipment Solutions with remote grease lines to designated swivel bearings on the cannon
  • The cannons are air operated, mounted in rear right-hand corner top of tank, remote controlled from cabin

CAB CONTROLS

  • Mounted on cab console
  • Air-switched controls fitted in a control box mounted to the front of the centre console

HOSE REEL

  • Graco spring rewind complete with 15m x 25mm hose and variable spray water faucet.

TANK CAPACITIES

  • 15,000 litres

TANK FITTING

  • Top-fill point funnel; site level gauges front and rear
  • Pump system
  • 3” high lift water pump with three fan sprays
  • Pressure outlets include a 1” ball valve outlet for hose reel

OTHER PIPING

  • Dammfill system
  • Quick-dump pipe and valve from bumper level to rear of tank wall
  • Tank bottom fill-point with pipe to top of tank and butterfly valve complete with 75mm camlock male and cap

BUMPER

  • Full width bumper incorporating LED tail lights and clearance lights.

TANK PAINTING

  • Tank and all components sandblasted to class 2½
  • Internal tank lining is two-pack epoxy to minimum 400 micron

OPTIONS

Because our modules are custom-manufactured to clients’ requirements, we offer a wide range of options, including:

  • Allison or Telma retarders available for most makes and models
  • Wrap around bull horn extensions for dribble bar
  • Hour meter for PTO circuit to monitor pump hours
  • Foam injection (fire control) system for water cannon with inbuilt 200 litre foam tank
  • Dual cannons, top- and bottom-mounted, with individual controls
  • Standalone ROPS/FOPS
  • Tank-top handrail mod behind cannon
  • Starter isolator
  • Extra beacon on rear handrail
  • Extra fire extinguisher (rear mount)
  • Steel wire to secure wheel chocks
  • Drop pipes – must be pre-ordered
  • Front sprays – must be pre-ordered
  • Twin pole isolator
  • Extra rear spray head (horizontal)
  • Vertical magnum batter sprays
  • Camlock fitting on pressure side
  • Tank flushing system
  • Wheel nut tags
  • Actual litre amount fill level marker
  • Grip-tape/paint on tank-top
  • T-clamps instead of worm clamps on sight gauges
  • Whip aerial
  • Bull bar
  • Heavy duty tyres
  • Flouro hi-vis tape (75mm)
  • VHF Radio
  • Park brake/seatbelt alarm
  • Auto-on for headlights
  • Blue beacon
  • Fire suppression system (specification required by client)

LIGHTING

  • LED lights on top corners of tank
  • Reverse alarm and reverse light fitted
  • Hella Amber Strobe type mounted on cab
  • 12 volt work lights fitted to the rear work area

FIRE EXTINGUISHER

Fitted to front driver-side of tank.

HYDRAULICS

  • Hotshift PTO installed driving a gear pump
  • 250 litre oil tank integrated into the front left corner of the water tank
  • Suction filter with replaceable canisters installed in the return line

SIGN WRITING

  • Company logo on left and right sides
  • Company reflective asset number 600mm x 300mm on left and right sides
  • All hose, reels and fill points labelled
  • Safety signage, compartments product labels, flammable liquids to meet Australian standards

COMMISSIONING

  • Pre-delivery operational checks
  • Meter calibration and flow rate testing
  • Parts book and service manual

FIRE SUPPRESSION

  • Fire suppression
  • Rails
  • guards and steps
  • electrical
  • ROPS

REVERSING CAMERA

  • Camera fitted to the rear of the tank